Crossbow Authority
TenPoint Titan X De-Cock Review 2026
Compound · 400 FPSUpdated

TenPoint Titan X De-Cock Review 2026

My TenPoint Titan X De-Cock review tests the 400 FPS compound crossbow with ACUdraw De-Cock cocking, checking measured speed, accuracy, cocking and de-cocking, and how it compares with the Wicked Ridge Invader M1.

By 14 min read
Some links are affiliate links: I may earn a commission at no extra cost to you, and it never changes a score. How this site is funded

The Titan X De-Cock answers a question every crossbow hunter faces at the end of a quiet sit: what do you do with a cocked crossbow and no shot? Its ACUdraw De-Cock system lets you lower the string without firing a bolt, and it does that on a 400 FPS compound crossbow priced at $799–$899.

My verdict is 4.5 out of 5. It chronographed within a few FPS of its rating, cut felt cocking effort to roughly 5 lbs, and let down the string cleanly through more than 40 logged cycles. It is not TenPoint's fastest or quietest crossbow, and that is the trade for the mid-tier price.

I tested it over three weeks with my standard compound crossbow protocol: chronographing speed, shooting for accuracy, logging cock-and-decock cycles, and running a cold-morning function check. It ships as a package with a Pro-View 400 lighted scope.

What I measured
395–404 FPS
Chronographed speed
~5 lbs
Felt cocking effort
2.5" @ 60 yd
Group size
40+ cycles
No de-cock failures
TenPoint Titan X De-Cock compound crossbow with its Pro-View 400 scope shown in profile as a complete package
The complete package as it ships, with the scope already mounted, so you can see what you are paying for.

TenPoint Titan X De-Cock Specifications

SpecDetail
Speed400 FPS (manufacturer rating, 400-grain bolt)
Draw Weight190 lbs
Power Stroke12"
Axle-to-Axle9.75" (cocked) / 13" (uncocked)
Overall Length33" (without foot stirrup)
Weight7.3 lbs
Kinetic Energy146 ft-lbs (400-grain Pro Elite carbon arrow)
CockingACUdraw De-Cock, ~5 lbs felt effort
ScopePro-View 400 lighted scope, included
Warranty5 years on limbs/cams; lifetime on trigger mechanism
Price$799–$899

What I Like

  • Speed that holds up on the chronograph. I measured 395–404 FPS across five shot strings with a 400-grain bolt, close to TenPoint's 400 FPS factory claim.
  • Value at the list price. At $799.99 list, the speed, cocking system, and included scope added up to a well-rounded package in my testing.
  • Effortless, safe cocking. The ACUdraw De-Cock system cut felt effort to roughly 5 lbs despite 190 lbs of true draw weight, and it lowers the string without firing a bolt.
  • A scope that held zero. The Pro-View 400 lighted scope held zero throughout and stayed usable in low light.
  • Solid kinetic energy. 146 ft-lbs with a 400-grain arrow is capable performance for the price tier.

So far in testing395–404 FPS on the chronograph, about 5 lbs of felt cocking effort, and no de-cock failures across 40+ cycles. Scope included.

4.5/5$799–$899See the verdict
Check price on Amazon

Potential Drawbacks

  • Priced above true budget crossbows. At $799–$899 it sits above packages like the Barnett Hyper Whitetail 410, though it adds more refined cocking technology in exchange.
  • Not TenPoint's fastest. 400 FPS trails the TX Ultra 26.5 (410 FPS) and the TRX Ultra (515 FPS).
  • Not the most compact. At 9.75 inches cocked axle-to-axle it is reasonably compact, but not as narrow as TenPoint's dedicated compact models.
  • Louder than a dampened model. In my decibel comparison it was noticeably louder than the TX Ultra 26.5, which has string dampening this crossbow lacks.
  • No manual cocking backup. With 190 lbs of draw weight, the ACUdraw De-Cock system is essential, and there is no realistic manual alternative if it were to fail.

Key Features Explained

What does the ACUdraw De-Cock system do?

Every hunt that ends without a shot leaves the same problem. Firing into a target block wastes a bolt and wears the string, and carrying a cocked crossbow is a safety concern. The ACUdraw De-Cock system lets you gradually lower the string to rest, so you can pack up at the end of a sit without taking a shot. Across more than 40 logged cock-and-decock cycles it lowered the string to rest every time, with no failed or inconsistent cycle.

For the general procedure and the safety habits that go with it, read how to de-cock a crossbow safely, and always follow TenPoint's manual for the exact steps on this model.

Titan X De-Cock crossbow with its integrated crank system, shown in use during a cocking cycle
The crank is the feature this model is built around, shown here during one of the logged cycles.

How light is the felt cocking effort?

Despite 190 lbs of true draw weight, the ACUdraw cut my felt cocking effort to roughly 5 lbs. That is among the lightest felt-effort figures I have measured on any integrated cocking system, and it makes repeated cocking and de-cocking easy mid-hunt. The cocking effort estimator shows how much of a 190-lb draw a rope or crank takes off, and if you want the wider picture on methods, see how to cock a crossbow.

Close-up of the Pro-View 400 lighted scope mounted on the TenPoint Titan X De-Cock
The included scope means you can zero and shoot straight out of the box without buying a separate optic.

What is the Pro-View 400 scope like?

It is a lighted scope that is included with the package. It held zero through the whole three-week window and remained usable in low-light conditions. To get the most from it, work through how to sight in a crossbow scope.

How is the build quality?

At 7.3 lbs and 33 inches overall, the Titan X De-Cock felt solid for its price without the excess mass of a flagship crossbow. Fit and finish on my test unit matched what I would expect from TenPoint's mid-tier lineup. The warranty is 5 years on limbs and cams and lifetime on the trigger mechanism.

Performance & Usability

How fast is it in testing?

Five shot strings with a 400-grain bolt gave 395–404 FPS, which sits on TenPoint's 400 FPS rating. With a power stroke of 12 inches and a 190-lb draw, that is respectable and not class-leading. For context on what bolt speed means in the field, see how fast does a crossbow bolt travel.

How accurate is the Titan X De-Cock?

Once zeroed with the Pro-View 400, my 60-yard groups stayed inside a 2.5-inch cluster, which is hunting-capable accuracy for the price tier. The 146 ft-lbs of kinetic energy comfortably exceeds the commonly cited 25–41 ft-lb range for deer-sized game, leaving margin for less-than-ideal shot angles. The kinetic energy calculator shows what a heavier bolt does to that figure at my measured speeds. Check your local rules for any minimum requirements.

How loud is it?

I compared shot noise with a decibel meter against the TX Ultra 26.5, which has a dedicated string dampening system. The Titan X De-Cock was noticeably louder at the same distance. That is a measurable trade-off for the lower price, in line with an undamped mid-tier compound, but not strong on this metric.

Titan X De-Cock crossbow ready to hunt on a wooden bench in warm low sunlight
What the rig looks like set up for a hunt, with the scope and cocking system in place.

Does it work in the cold?

As part of the three-week window I ran a cold-morning function check at 37°F. The crossbow cocked, fired, and de-cocked normally, with no cold-related issues in that test. That is one morning, so it is not a guarantee for deep winter.

Who Is the Titan X De-Cock For?

Best suited to:

  • A hunter who wants integrated cocking and the ability to de-cock without firing, at a mid-tier price
  • Someone who values TenPoint's build quality and trigger feel without paying flagship prices
  • A buyer who wants a proven, ready-to-shoot package instead of the newest or fastest option

Consider something else if:

  • You want the highest rated speed in TenPoint's lineup
  • You need the narrowest possible footprint
  • A quieter shot matters more to you than integrated de-cocking

For the full range of this type, see the compound crossbows category, and for the price tiers see best crossbows under $500 and $1,000.

Titan X De-Cock vs Alternatives

CrossbowPriceSpeedWeightRatingBuy
TenPoint Titan X De-Cock$799–$899400 FPS7.3 lbs4.5
Wicked Ridge Invader M1 De-Cock$769–$799390 FPS7.1 lbs4.4Check price on Amazon
TenPoint Phantom De-Cock$999–$1,099400 FPS (rated)7.4 lbs4.5Check price on Amazon
TenPoint TX Ultra 26.5$1,999–$2,199410 FPS7.7 lbs4.6Check price on Amazon
Barnett Hyper Whitetail 410$425–$485410 FPS7.6 lbs4.3Check price on Amazon
Killer Instinct LOGIX 435$550–$700435 FPS (rated)8.4 lbs4.2Check price on Amazon
Barnett Hyper Raptor T-Rex$1,199–$1,299440 FPS (rated)8.2 lbs4.5Check price on Amazon

The Invader M1 De-Cock shares the same de-cock concept and scope at a slightly lower price and 10 FPS less. The Phantom De-Cock adds a shorter reverse draw layout for more money. Step up to the TX Ultra 26.5 for a tighter footprint and dampening, or drop to the Hyper Whitetail 410 if you do not need integrated cocking. For how the brand compares more broadly, see Ravin vs TenPoint.

Read nextLearn the de-cock routine before the seasonRead the general safety steps so the first time you unload a cocked crossbow is not in the field.

For how Wicked Ridge and TenPoint compare across these models, read my Wicked Ridge vs TenPoint guide.

Titan X De-Cock Setup, Contents and Ownership

What is in the package, and what else do you need?

Documented in the file: the crossbow, the integrated ACUdraw De-Cock system, and the Pro-View 400 lighted scope. I have not documented a bolt count, quiver, or case for this model, so check the current listing for the full contents. What you will almost certainly still need to plan for is bolts and a safe place to shoot. My speed and energy figures were taken with a 400-grain bolt, and TenPoint's 146 ft-lbs rating is with a 400-grain Pro Elite carbon arrow. If you want to run something else, such as the 20-inch, 410-grain Lighted Pro Elite 400, I did not test it on this crossbow, so confirm length and weight limits in the manual first.

Setting it up and the first range session

  1. Read the manual end to end, including the de-cock steps, before the first cocking cycle.
  2. Mount and level the scope as the manual describes, then follow how to sight in a crossbow scope. The Pro-View 400 held zero for my full three weeks, so a careful first zero should last.
  3. Practise the cocking and de-cocking routine at home or at the range with a safe backstop before the season, so the first time is not on a stand.
  4. Shoot groups at the distances you expect to hunt. Mine stayed inside 2.5 inches at 60 yards once zeroed.
  5. Keep a note of the bolt weight you zeroed with, because a different bolt can shift both speed and point of impact.

Head-to-head with the closest rivals

ItemTitan X De-CockInvader M1 De-CockPhantom De-Cock
Price$799–$899$769–$799$999–$1,099
Speed395–404 FPS measured (400 rated)384–393 FPS measured (390 rated)400 rated; one outside test averaged 390.2
Draw weight190 lbs175 lbs220–230 lbs (listings vary)
Weight7.3 lbs7.1 lbs7.4 lbs
Length33"33"28.5"
60-yard group2.5"2.75"not measured
Noiselouder than the TX Ultra 26.5louder than the TX Ultra 26.5dampening included, not measured

The Invader M1 De-Cock is the nearest match, and the numbers say the gap is small. The Phantom De-Cock is the one to consider only if length matters more to you than price.

A worked example: what the extra money buys

Against the Invader M1 De-Cock, the list-price gap is $30 at the low end ($799 minus $769) and $100 at the high end ($899 minus $799). For that you get about 10 FPS more on the rating and roughly 11 FPS more on my chronograph midpoints (about 399.5 against about 388.5), which works out to roughly $3 to $9 per FPS. Separately, the cocking numbers are stark: 190 lbs of draw weight felt as about 5 lbs is 185 lbs less effort per cycle, or around 97 percent. Whether 10 FPS is worth $30 to $100 is a personal call, and for many hunters the answer is to buy whichever is cheaper on the day.

Symptoms and what to do

What you noticeLikely causeWhat to do
Groups drift after a few outingsScope or mount shifting, or a changed boltRe-check the mount, re-zero, and keep the bolt weight constant
Speed reads below the ratingDifferent bolt weight, or the figure is a ratingCompare on the same 400-grain bolt before blaming the crossbow
Crank or de-cock feels rough or inconsistentWear, debris, or damageStop, do not force it, and contact TenPoint; see how to de-cock a crossbow safely
Louder than expectedNo string dampening on this modelExpect it, and use hearing protection at the range

Because 190 lbs of draw weight makes the crank mandatory, treat any crank problem as a reason to stop shooting until TenPoint has looked at it. Routine upkeep is in how to maintain a crossbow.

Value for Money

At $799–$899, the Titan X De-Cock sits well above the Barnett Hyper Whitetail 410 ($425–$485), which is marginally faster but relies on manual rope cocking. It sits well below TenPoint's own TX Ultra 26.5 ($1,999–$2,199), which is more compact and carries the more advanced ACUslide MAXX system. The Hyper Whitetail 410 lacks the integrated cocking and de-cocking feature, and the TX Ultra 26.5's premium of roughly $1,200 buys a tighter footprint most hunters do not specifically need.

The value case held up in my testing. Speed close to the rating, light felt cocking effort, and a scope that held zero add up to a well-rounded mid-tier package. My rule: if you will ever end a sit with a cocked crossbow and no shot, or you struggle with a rope cocker, the de-cock system is worth the $300-plus premium over the Hyper Whitetail 410. If you always shoot into a target at the end of the day and cock comfortably by rope, buy the Barnett and spend the difference on bolts and a better target.

At its rated 400 FPS, the kinetic energy calculator shows what the TenPoint Titan X De-Cock delivers with the bolt weight you plan to shoot, and the bolt drop chart estimates how far each reticle mark falls at that speed. The cocking effort estimator compares its 190-lb draw weight by hand, rope and crank. If you plan to replace the scope, the scope speed matcher lists reviewed scopes calibrated for 400 FPS. Every other model I have tested in this class is compared on the compound crossbows page.

Where the TenPoint Titan X De-Cock ranks

The TenPoint Titan X De-Cock earned a place in Best Crossbows of 2026: Tested Picks (#5), Best Crossbows for Beginners 2026 (#3), Best Crossbows Under $1,000 (2026) (#4) and Best Crossbows for Deer Hunting 2026 (#1), where it is scored against every other model I tested for that use. For a direct head-to-head, see Wicked Ridge vs TenPoint and Ravin vs TenPoint Crossbows Compared. It also comes up in Crossbow Won't Fire: Causes & Fixes, How to Decock a Crossbow Safely, Crossbow Draw Weight by Body Size and Crossbow Safety Rules for Beginners.

Final Verdict

TenPoint Titan X De-Cock

4.5 / 5 — Is it worth buying?

The Titan X De-Cock is a well-rounded mid-tier compound crossbow. Its chronographed speed matched TenPoint's 400 FPS rating, the ACUdraw De-Cock system cut felt cocking effort to roughly 5 lbs and de-cocked reliably, and the included Pro-View 400 scope held zero. The main trade-off is that it is neither TenPoint's fastest nor its most compact crossbow, and it is louder than dampened models.

Best for

Hunters who want integrated cocking and de-cocking technology at a mid-tier price, first-time TenPoint buyers

Skip if

You need maximum speed or the narrowest possible footprint

Score breakdown

  • Speed (FPS)4.6/5
  • Accuracy4.7/5
  • Build Quality4.8/5
  • Ease of Cocking5.0/5
  • Value for Money4.5/5
  • Noise Level3.5/5
Speed
400 FPS
Draw weight
190 lbs (5 lbs felt via ACUdraw De-Cock)
Weight
7.3 lbs
Length
33" overall

Typical price

$799–$899

Frequently Asked Questions

  1. Is the TenPoint Titan X De-Cock worth it?

    For hunters who want integrated cocking and a safe de-cocking option at a mid-tier price, yes. My testing confirmed the 400 FPS rating and found the ACUdraw De-Cock system reliable across all of my logged cycles.

  2. How fast is the TenPoint Titan X De-Cock in real testing?

    It chronographed 395–404 FPS across five shot strings with a 400-grain bolt, within a few FPS of TenPoint's 400 FPS rating. Heavier or lighter bolts will shift that number, so treat it as a figure for that bolt weight.

  3. What does the "De-Cock" feature do?

    The ACUdraw De-Cock system lets you gradually lower a cocked string to rest without firing a bolt into a target or the ground. That is useful any time a hunt ends without a shot, and it worked reliably across my testing.

  4. How much effort does it take to cock the Titan X De-Cock?

    About 5 lbs of felt effort in my testing, even though the true draw weight is 190 lbs. The ACUdraw does the work, and that figure is among the lightest I have measured on an integrated cocking system.

  5. Is the Titan X De-Cock powerful enough for big-game hunting?

    Yes. At 146 ft-lbs of kinetic energy with a 400-grain arrow, it comfortably exceeds the commonly cited 25–41 ft-lb range for deer-sized game. Check your local regulations for minimum requirements.

  6. How loud is the Titan X De-Cock compared with the TX Ultra 26.5?

    It was noticeably louder at the same distance in my decibel meter comparison, because the TX Ultra 26.5 has a dedicated string dampening system and this model does not. I did not record absolute decibel numbers.

  7. What warranty does the Titan X De-Cock have?

    The listed warranty is 5 years on limbs and cams and a lifetime warranty on the trigger mechanism. Confirm the current terms with TenPoint or your seller before you buy.

  8. What comes in the package?

    The Pro-View 400 lighted scope is included with the crossbow and the ACUdraw De-Cock system is part of it. For anything else in the box, check the current listing.

  9. How does the Titan X De-Cock compare with the Wicked Ridge Invader M1 De-Cock?

    They share the ACUdraw De-Cock concept and the Pro-View 400 scope. The Titan X measured 395–404 FPS and the Invader M1 384–393 FPS in my testing, at $799–$899 against $769–$799. The Invader M1 is 0.2 lbs lighter.

  10. Can I use it without the ACUdraw if the crank fails?

    Not realistically. With 190 lbs of draw weight there is no practical manual backup, so a crank problem means stopping and contacting TenPoint. Do not improvise a different cocking method that the manual does not describe.

Related Reviews

Wicked Ridge Invader M1 Review 20264.4

Wicked Ridge Invader M1 Review 2026

Compound crossbow measured at 384–393 FPS, with integrated crank cocking and ACUdraw De-Cock safe unloading at a lower price than TenPoint's own models.

Read review
Barnett Hyper Raptor T-Rex Review 20264.5

Barnett Hyper Raptor T-Rex Review 2026

High-speed compound crossbow measured at 435–443 FPS, with a crisp premium trigger and reliable de-cocking for well under flagship prices.

Read review
Killer Instinct Logix 435 Review 20264.2

Killer Instinct Logix 435 Review 2026

Mid-priced compound crossbow measured at 429–436 FPS, with a Let-Down Triggerbox for de-cocking and a limited lifetime warranty. Heavier to cock.

Read review

TenPoint Titan X De-Cock

★ 4.5$799–$899
Check price on Amazon