What a foam block target is in plain terms
What a foam block target is meaning: A foam block target is a solid practice target made of foam layers fused into one block, rated by its maker to stop bolts up to a stated speed.
Also called: layered foam target, layered foam block, block target, foam block targets
A foam block target is a practice target made from sheets of foam fused or pressed into one solid block. Most have shooting faces on several sides, so you can turn the block when one face wears out.
Makers rate each block to stop arrows and bolts up to a stated speed in FPS. The Morrell Yellow Jacket Dual Threat, for example, is rated by Morrell to stop speeds up to 380 FPS.
Because the foam is solid, many blocks are rated for both field points and broadheads. A bag target, a fabric shell packed with fill, is usually meant for field points only.
Why it matters
A crossbow bolt arrives faster and carries more energy than most arrows from a vertical bow. A block rated below your crossbow's speed can let bolts bury deep or pass through.
Broadhead practice needs a target that blades can cut into without destroying it, and a solid foam block is the usual choice.
How to read it on a spec sheet
- Compare the block's speed rating with your crossbow's rated speed; the rating should be at or above it.
- Check whether the maker approves it for broadheads as well as field points.
- Count the shooting sides and aim points: more faces spread wear further.
- Look for a replacement core or cover if you shoot often.
Common mistakes
- Buying a block rated below your crossbow's speed.
- Shooting every bolt at the same aim point until one spot wears through.
- Twisting bolts on the way out, which widens the holes.
- Leaving the block in the sun between sessions.
Frequently Asked Questions
What is a foam block target?
It is a solid practice target made of foam layers fused into one block, rated by its maker to stop bolts up to a stated speed.
Is a foam block better than a bag target for crossbows?
For broadheads, usually yes, because the solid foam takes blades. A bag target is often easier to pull field points from but is generally not meant for broadheads.
What speed rating do I need?
One at or above your crossbow's rated speed. A crossbow rated 390 FPS needs a block rated above 380 FPS, for example.
Why does my foam block wear out in the middle?
Most people aim at the same spot. Rotate through the aim points and turn the block to a fresh side.
How do I make bolts easier to pull out?
Pull straight back along the shaft while holding the block, and use a little target lubricant on the point.
Related guides
Guides where foam block target shapes a real choice.
GuideHow to Sight In a Crossbow ScopeSighting in a crossbow scope step by step: safe lane setup, first zero, confirming each aiming point, and re-checking with your hunting tip.Read the guide
GuideCrossbow Broadhead Tuning: Get Broadheads on Your ZeroWhy broadheads leave your field-point group, and the home procedure, in order, that brings them back before the season.Read the guide
Definitions are general information. Manufacturer figures vary, so follow your crossbow's manual and verify local laws with the relevant authority.
