What a chisel tip is in plain terms
What a chisel tip is meaning: A chisel tip is a broadhead point ground to a few flat faces instead of a cutting edge, built to punch through hide and split bone rather than slice.
Also called: chisel point, chisel-tip
A chisel tip is a broadhead point ground to a short pyramid of flat faces. It does not slice like a blade; it punches a hole and is meant to split bone rather than glance off it.
The other common style is cut-on-contact, where sharpened blades run right to the point and start cutting as soon as they touch hide. A chisel tip puts a hard point in front and lets the blades cut behind it.
Several heads reviewed here use one. TenPoint lists a hardened chisel tip on the TenPoint Nemesis Broadhead, and Muzzy describes the Muzzy Trocar HBX Crossbow Broadhead as having a bone-crushing chisel tip.
Why it matters
Shots do not always find only soft tissue. A tip built for bone helps a head keep going if it meets a rib or shoulder.
The tip leads the head, so a bent or blunted tip can change flight and penetration. It is one of the first parts to inspect after a shot.
How to read it on a spec sheet
- Check whether the maker lists a chisel or a cut-on-contact tip.
- Look for the tip material; some makers state hardened steel, others give none.
- Read the ferrule material alongside it, since the tip sits on the ferrule.
- Note that the listed weight in grains includes the tip.
Common mistakes
- Assuming a chisel tip makes shot placement less important.
- Shooting a head with a rolled or chipped tip.
- Expecting a chisel tip to slice like a blade on entry.
- Reading a maker's description of the tip as an independent result.
Frequently Asked Questions
What is a chisel tip broadhead?
It is a broadhead with a point ground to a few flat faces rather than sharpened edges. The tip punches through and is built to split bone, while the blades behind it do the cutting.
Chisel tip or cut-on-contact: which is better?
They do different jobs. A chisel tip is built to resist bone, while a cut-on-contact tip starts slicing immediately. Many crossbow heads use chisel tips; choose by your setup and the maker's guidance.
Do chisel tips need sharpening?
They are not sharpened like blades, but they can roll or chip on impact. Inspect the tip after every shot and retire a head with a damaged point from hunting.
Does a chisel tip help on shoulder shots?
It is built to split bone, which helps if a bolt meets a rib or shoulder. It is not a reason to aim at heavy bone; aim for the vitals on every shot.
Is the chisel tip part of the broadhead weight?
Yes. The listed weight in grains is the whole head, including the tip, ferrule and blades.
Can I replace a chisel tip?
On some heads the tip is a separate part and on others it is fixed. Check the maker's parts list before planning on a replacement.
Related guides
Guides where chisel tip shapes a real choice.
GuideBest Crossbow Broadheads for Deer 2026Four reviewed deer broadheads compared on total cut, blade design and maker speed rating, with notes on matching each head to your bolts and crossbow.Read the guide
GuideFixed-Blade Broadheads for CrossbowsFixed-blade crossbow broadheads explained: single versus multi-blade designs, cutting diameter, sharpening, practice, and when to choose fixed over mechanical.Read the guide
GuideCrossbow Shot Placement on Deer: Every Angle ExplainedThe vital zone, the take-or-pass call for every angle, tree stand aim points, string jumping, and how long to wait after the shot.Read the guide
Definitions are general information. Manufacturer figures vary, so follow your crossbow's manual and verify local laws with the relevant authority.
