What a broadhead ferrule is in plain terms
What a broadhead ferrule is meaning: A ferrule is the main body of a broadhead: the part that threads into the bolt and holds the tip and blades, usually aluminum, steel or titanium.
Also called: broadhead ferrule
The ferrule is the body of a broadhead. Its threaded base screws into the insert in the bolt, the tip sits at its front, and the blades are fixed to it or hinge from it.
Makers build ferrules from aluminum, steel or titanium. The TenPoint Nemesis Broadhead and the Ravin R102 Broadhead use 7075-T6 aluminum.
Muzzy lists a stainless steel ferrule for the Muzzy Trocar HBX Crossbow Broadhead. Some fixed heads are one-piece, with the ferrule and blades machined from a single piece of metal.
Because it carries every other part, the ferrule decides how well a head survives bone and hard targets and whether it spins true on the bolt.
Ferrule materials on reviewed broadheads
| Broadhead | Ferrule material (maker) | Weight |
|---|---|---|
| TenPoint Nemesis Broadhead | 7075-T6 aluminum | 100 grains |
| Ravin R102 Broadhead | 7075-T6 aluminum | 100 grains |
| Muzzy Trocar HBX Crossbow Broadhead | Stainless steel | 100 grains |
Why it matters
The ferrule takes the impact when a head meets bone. Steel and titanium are harder than aluminum, while aluminum keeps weight low for the same size.
A ferrule that is bent or not square to the threads makes the head wobble, which can push a broadhead away from your field-point impact.
How to read it on a spec sheet
- Look for the ferrule material on the maker's spec list.
- Check whether the head is one-piece or uses blades fitted to the ferrule.
- Confirm the thread suits your bolt inserts.
- Read the weight in grains, which includes the ferrule.
Common mistakes
- Assuming every ferrule is steel because the blades are.
- Shooting a head again after a hard impact without checking the ferrule for bends.
- Overtightening a head with pliers and damaging the threads.
- Skipping a spin test after threading a new head on.
Frequently Asked Questions
What is a ferrule on a broadhead?
It is the main body of the broadhead. It threads into the bolt insert, carries the tip at the front and holds the blades, so every other part of the head is mounted on it.
Is a steel or aluminum ferrule better?
Each has a trade-off. Steel is harder and resists bending, while aluminum is lighter for the same size. Makers choose the material to hit a target weight and strength, so read the full spec list.
How do I check a ferrule for damage?
Look for bends, cracks or damaged threads, then thread the head onto a bolt and spin it. A wobble at the tip means the ferrule or the insert is not straight.
Can I reuse a broadhead after hitting bone?
Only after you inspect it. Check the ferrule for bends, the tip for damage and the blades for chips. If the head wobbles on a spin test, retire it from hunting.
Does the ferrule affect broadhead weight?
Yes. The listed weight in grains includes the ferrule, tip and blades together, and the ferrule is usually the largest part of it.
What is a one-piece broadhead?
It is a head where the ferrule and blades are machined from a single piece of metal, so no blades or screws can loosen. Many fixed-blade heads are made this way.
Related guides
Guides where ferrule shapes a real choice.
GuideFixed-Blade Broadheads for CrossbowsFixed-blade crossbow broadheads explained: single versus multi-blade designs, cutting diameter, sharpening, practice, and when to choose fixed over mechanical.Read the guide
GuideBest Crossbow Broadheads for Deer 2026Four reviewed deer broadheads compared on total cut, blade design and maker speed rating, with notes on matching each head to your bolts and crossbow.Read the guide
GuideCrossbow Broadhead Tuning: Get Broadheads on Your ZeroWhy broadheads leave your field-point group, and the home procedure, in order, that brings them back before the season.Read the guide
Definitions are general information. Manufacturer figures vary, so follow your crossbow's manual and verify local laws with the relevant authority.
