The Barnett HyperTac 420 is Barnett's 32 inch Hyper crossbow: 9.2 inches wide when cocked, rated at 420 FPS and 149 ft-lbs from a 210 lb draw, 7.6 lb bare, with a 3 lb TriggerTech trigger and .204 HyperFlite arrows. It suits deer hunters in ground blinds who accept proprietary arrows. It is also not the HyperTac Pro 430, which is a separate model.
Barnett HyperTac 420 Specs
These are the Barnett HyperTac 420 specs as Barnett lists them on its product page. Where other listings disagree, the right-hand column says so.
| Spec | Barnett lists | Note |
|---|---|---|
| Speed | 420 FPS | Rated with a 380-grain arrow |
| Kinetic energy | 149 ft-lbs | |
| Draw weight | 210 lbs | Some earlier write-ups list 215 lb |
| Power stroke | 15.5 in | |
| Axle-to-axle, cocked | 9.2 in | Uncocked width not published |
| Length | 32 in | One 2023 review gives 35.9–38.4 in |
| Weight | 7.6 lbs (bare) | Some earlier write-ups list 7.9 lb |
| Trigger | TriggerTech Frictionless Release, 3 lb, zero creep | Anti-dry-fire, nock sensors |
| Scope | 1.5-5x32, red/green illuminated, speed-compensating | Reticles for 20–70 yd |
| Arrows | Three 22 in HyperFlite, .204 small diameter | |
| Cocking | Rope cocking device | No crank listed |
| Camo | Mossy Oak Elements Terra Gila |
Where listed figures disagree
Some earlier write-ups list a 215 lb draw and a 7.9 lb weight; Barnett's page lists 210 lb and 7.6 lb, and we use Barnett's figures. Barnett lists the length as 32 inches, while one 2023 review gives 35.9–38.4 inches across the stock's settings, so the shorter figure likely reflects the stock at its shortest.
Barnett gives the scope's aiming points as 20 to 70 yards; the same 2023 review describes reticles out to 100 yards. Barnett's feature list also names a "Metal Injection Molded" trigger next to the TriggerTech name, which reads as a TriggerTech trigger with metal-injection-moulded parts. On cocking, Barnett's box list names a rope cocker and no crank, while that review describes a crank built into the stock. Confirm crank fit with Barnett before you buy one.
How It Compares With Other Barnett Crossbows
The HyperTac 420 sits between Barnett's 410-class bows and its faster flagship. The Barnett Hyper Whitetail 410 is the budget option with the same 9.2 inch cocked width, and the Barnett Hyper Raptor T-Rex is the step up, with more speed and a built-in crank and de-cocker.
| Crossbow | Speed | Draw weight | Weight | Length | Axle-to-axle, cocked | Cocking | Buy |
|---|---|---|---|---|---|---|---|
| Barnett HyperTac 420 | 420 FPS | 210 lbs | 7.6 lbs | 32 in | 9.2 in | Rope cocker | Check price on Amazon |
| Barnett Hyper Whitetail 410 | 410 FPS | 190 lbs | 7.6 lbs | 35.25 in | 9.2 in | Rope sled | Check price on Amazon |
| Barnett Hyper Raptor T-Rex | 440 FPS | 220 lbs | 8.2 lbs | 32 in | 7.25 in | Built-in crank, de-cocks | Check price on Amazon |
| Barnett XPX 410 | 410 FPS | 220 lbs | 6.9 lbs | 32.5 in | ~7 in | Rope cocker, crank-ready | Check price on Amazon |
The HyperTac 420 is not the narrowest Barnett we review: the T-Rex and the Barnett XPX 410 are both narrower when cocked. Its case is the mix of a 32 inch length, a 210 lb draw that is lighter than either of those, and a 420 FPS rating. Is the HyperTac 420 the same as the HyperTac Pro 430? No. The Pro 430 is a separate, higher model in the HyperTac line.
Worth knowingCheck the current price if a short, scoped 420 FPS compound for blind hunting is what you need.
Size and Handling in a Blind
Axle-to-axle width is the distance between the cams when the bow is cocked. It decides whether the limbs clear the walls and window edges of a blind when you swing toward a deer, or catch on branches as you move through brush. At 9.2 inches cocked and 32 inches long, the HyperTac 420 is mid-width among the Barnetts we review: the T-Rex and XPX 410 are narrower, so its length helps more than its width in a small space.

At 7.6 lb bare, it is about average for a scoped compound; with the scope, quiver and arrows fitted it will feel heavier in the field. The pass-through forend lets your front hand wrap around the bow below the flight track, and the multi-position pistol grip lets you set the rear hand angle you shoot best with. Both matter when you shoot from a stool in a ground blind at awkward angles.
Barnett also lists a CNC-machined aluminium flight track, a single-bolt assembly and three Picatinny scope rails for a light or other accessories. Our roundup of the best compact crossbows compares short, narrow bows from other brands.
HyperFlite Arrows: What It Shoots
What arrows does the HyperTac 420 use? Barnett's HyperFlite arrows: 22 inch small-diameter shafts with a .204 inch inside diameter. Three come in the box. Small-diameter arrows need matching inserts and broadheads sized for them, and they are sold by fewer stores than standard-diameter bolts.
Barnett rates the 420 FPS speed with a 380-grain arrow. A heavier hunting arrow with a broadhead will fly a little slower and a lighter one a little faster, so treat 420 as a reference figure rather than what your own setup will do.
Buy a few extra HyperFlite arrows when you buy the bow, so a lost or damaged arrow does not end your season. Barnett also sells standard-diameter arrows, covered in our review of Barnett HeadHunter arrows, but Barnett's HyperTac 420 page does not list them for this bow, so stay with HyperFlite unless Barnett confirms otherwise.
Cocking a 210 lb Draw
The box includes a rope cocking device, which roughly halves the pull of the 210 lb draw weight. Can you crank the HyperTac 420? Barnett's box list does not name a crank, so confirm crank fit with Barnett before buying one. A crank cocking device is slower but much easier on the back and shoulders.

To use the cocking rope, put a foot in the stirrup, hook both sides onto the string, and pull the handles evenly until the string latches.
Our guide on how to cock a crossbow covers the technique step by step.
The HyperTac 420 has no built-in de-cocking system. To unload it, shoot a discharge bolt into a target; never let the string down by hand. Our guide on how to de-cock a crossbow safely explains the steps.
Trigger, Safety and Fit
The HyperTac 420 uses a TriggerTech Frictionless Release trigger system that Barnett rates at a 3 lb trigger pull with zero creep, so the shot breaks cleanly without the trigger moving first.
Anti-dry-fire protection and nock sensors block the trigger unless an arrow is seated against the string.
For fit, the butt stock has an adjustable length of pull, so a smaller-framed shooter or someone in a thick coat can shorten the reach to the trigger. The Soft Lok floating bristle retainer holds the arrow on the rail without pressing down hard on it.
What Comes in the Box
Barnett's in-the-box list for the HyperTac 420:
- Scope: a 1.5-5x32 scope with a red/green illuminated reticle and a speed-compensating adjustment, with aiming points for 20 to 70 yards.
- Arrows: three 22 inch HyperFlite .204 arrows.
- Rope cocker: a rope cocking device for the 210 lb draw.
- Quiver: a side-mount quiver that holds three arrows.
- Wax: lubrication wax for the string and rail.
What you still need: broadheads sized for .204 arrows, a few spare HyperFlite arrows, a discharge bolt or a target you can shoot into to unload, and a target for practice.
Known Complaints
What are the HyperTac 420's problems? Owner reviews on Barnett's product page raise three themes. Some owners report cracked limbs. Some report aluminium nocks bending. Several mention the cost of replacement HyperFlite arrows. These are owner reports, not findings of ours, and they do not say what caused each problem.
What you can do: do not leave the bow cocked for long periods, de-cock it by shooting a discharge bolt as Barnett's manual describes, use the nock type Barnett specifies, and register the bow for warranty when it arrives. Our guide to common Barnett crossbow problems explains the usual causes and fixes.
Barnett publishes no specification for replacement strings on this page, so ask Barnett for the correct string and cables.
Power for Deer
Barnett rates the HyperTac 420 at 149 ft-lbs of kinetic energy and 420 FPS from a 15.5 inch power stroke. That is well above what most guidance asks for on whitetail at normal crossbow distances, so power is not the limit; shot placement and your own range are.
Our guide on FPS and kinetic energy for deer explains how much is enough, and the kinetic energy calculator works out energy for the arrow weight you will actually hunt with.
Who Should Buy It, and Who Should Skip It
Buy it if:
- You hunt deer from a ground blind or a brushy stand and want a 32 inch bow rated over 400 FPS with a scope and arrows included.
- You want a lighter draw than the 220 lb T-Rex and XPX 410, and you are happy with a rope cocker.
Skip it if:
- You want arrows you can buy in any store. Our review of the Hyper Whitetail 410 shows it also uses HyperFlite arrows, so look beyond Barnett's Hyper line for standard-diameter bolts.
- You want a crank or a de-cocking system in the box. The Hyper Raptor T-Rex has both.
- You want a lower-cost Barnett. The Hyper Whitetail 410 has the same cocked width and a lighter 190 lb draw.
- Your state limits draw weight or crossbow use in archery season. Check our page on crossbow hunting laws by state before you buy.
For the rest of the range, our ranking of the best Barnett crossbows places each model by hunter type.
Read nextCompare every Barnett we reviewOur Barnett ranking places each model by hunter type and budget.At its rated 420 FPS, the kinetic energy calculator shows what the Barnett HyperTac 420 delivers with the bolt weight you plan to shoot, and the bolt drop chart estimates how far each reticle mark falls at that speed. The cocking effort estimator compares its 210-lb draw weight by hand, rope and crank. If you plan to replace the scope, the scope speed matcher lists reviewed scopes calibrated for 420 FPS. Every other model reviewed in this class is compared on the compound crossbows page.
Where the Barnett HyperTac 420 ranks
The Barnett HyperTac 420 is discussed in Crossbow Ground Blind Hunting: Setup, Rests and Lanes.
Barnett HyperTac 420 Review: Final Verdict
Barnett HyperTac 420
4.3 / 5 — Is it worth buying?
The Barnett HyperTac 420 puts a 420 FPS rating, a 3 lb TriggerTech trigger and a full kit into a 32 inch bow that is 9.2 inches wide when cocked. Accuracy (4.5/5) reflects the rated TriggerTech trigger, the illuminated speed-compensating scope and the 420 FPS rating. Ease of cocking (4.2/5) reflects a 210 lb draw with a rope cocker and no listed crank. Noise (3.8/5) reflects Barnett's pre-installed string dampeners and no published decibel rating.
Best for
Deer hunters in ground blinds and brushy stands
Skip if
You want standard-diameter arrows or a crank in the box
Score breakdown
- Speed (FPS)4.8/5
- Accuracy4.5/5
- Build Quality4.3/5
- Ease of Cocking4.2/5
- Value for Money4.2/5
- Noise Level3.8/5
- Speed
- 420 FPS
- Draw weight
- 210 lbs
- Weight
- 7.6 lbs
- Length
- 32" overall
Typical price
$899–$999
Frequently Asked Questions
What arrows or bolt size does the HyperTac 420 use?
22 inch HyperFlite arrows with a .204 small diameter. Three come in the box, and Barnett does not list standard-diameter arrows for this bow.
Can you crank the HyperTac 420?
Barnett's box list includes a rope cocker and does not list a crank. Confirm crank fit with Barnett before buying one.
Is the HyperTac 420 the same as the HyperTac Pro 430?
No. The Pro 430 is a separate, higher model in the HyperTac line.
How much does the HyperTac 420 cost?
It is listed at $899–$999. Check the retailer for today's price.
How wide is the HyperTac 420?
Barnett lists 9.2 inches axle-to-axle when cocked and a 32 inch length.
Is Barnett a good crossbow brand?
Barnett's range runs from budget kits to premium bows. Our Barnett ranking compares each model we review.
Is the HyperTac 420 legal in archery season?
That depends on your state. Some states allow crossbows in archery season for everyone, some only for certain hunters, and some set minimum draw weights. Check the current rules for your state before you hunt.
Related Reviews
4.4Barnett Hyper Raptor T-Rex
High-speed compound crossbow rated at 440 FPS, with a TriggerTech trigger and integrated de-cocking for well under flagship prices.
Read review
4.3Barnett XPX 410
A compact 220 lb Barnett rated at 410 FPS with TriggerTech and a rope cocker, for budget deer hunters who hunt from tight blinds.
Read review
4.3Barnett Hyper Whitetail 410
Hunting-ready compound crossbow package rated at 410 FPS. Scope, bolts and cocking aid included; best suited to shots inside 40 yards.
Read review